logo
Aktueller Firmenfall über
Details der Lösungen
Created with Pixso. Heim Created with Pixso. Lösungen Created with Pixso.

PLA ABS PETG TPU 3D Printer Filament Extruder Machine Delivered to Malaysian Filament Producer

PLA ABS PETG TPU 3D Printer Filament Extruder Machine Delivered to Malaysian Filament Producer

2026-11-18
Project Overview

A filament producer in Malaysia ordered a PLA ABS PETG TPU 3D printer filament extruder machine from Friend Plastic Machine — the CE certified FLD-45 single screw line — to replace toll-produced filament with in-house production. The brief was unusual in one respect: the client wanted one machine, four polymers. PLA, ABS, PETG and TPU all had to run on the same 45 mm extruder with no screw change, only a die and temperature recipe change. The line was built, trial-run on the customer's own resins in our Zhangjiagang workshop, shipped in 30 working days, and has been running three polymer families commercially since commissioning, with TPU added in the third month.

Customer Background

The buyer supplies 1.75 mm filament to Malaysian 3D printing service bureaus, school STEM programmes and a growing base of industrial users in Johor and Selangor. Sourcing finished filament from third-party extruders gave them 4–6 week lead times, no control over batch-to-batch diameter, and no short colour campaigns for local resellers. Their target was an in-house line that could switch between commodity materials in a single shift.

Malaysia's year-round humidity is unforgiving to hygroscopic polymers, so moisture control rather than line speed became the decisive issue.

Materials and Process Requirements
MaterialBarrel TemperaturePre-dryingPractical Output
PLA190–210 °C45 °C / 4 h20–22 kg/h
ABS230–250 °C75 °C / 4 h19–21 kg/h
PETG235–250 °C65 °C / 5 h18–20 kg/h
TPU (95A)195–215 °C80 °C / 4 h12–15 kg/h

All four materials had to hold 1.75 mm ±0.03 mm, because the client's service-bureau customers print on both Bowden and direct-drive machines where diameter drift shows up immediately as under-extrusion or jams. TPU set the hardest constraint: soft pellets feed unevenly, generate more die swell, and need gentler screw compression and tighter haul-off control than rigid polymers.

Machine Configuration Supplied
  • FLD-45 / SJ-45 single screw extruder, 45 mm screw, 15 kW drive, general-purpose screw geometry suitable for both rigid and soft polymers
  • 1.75 mm strand die and calibration plate set, plus a 3.0 mm set for industrial users
  • Two 3 m water cooling baths with calibration — extended cooling is what keeps TPU round rather than oval
  • Caterpillar haul-off unit with fine speed control for soft filament
  • Variable speed wind-up station for 1–5 kg spools
  • Hopper dryer with dehumidified air, sized for the Malaysian climate
  • CE certified electrical cabinet, guarded rotating parts, emergency stop circuit
Commissioning and Material Trials

A Friend commissioning engineer spent eight days on site in Malaysia. The first three days were mechanical: levelling the 17 m line, setting die and calibration gaps, and establishing stable haul-off tension. The remaining days were dedicated to material trials, working through the four polymers in sequence so the client's operators could see how the same line responds differently to each one:

  1. Temperature profile and screw speed settings for PLA, ABS, PETG and TPU
  2. Drying routine for each polymer, including a check that showed visibly bubbling PETG before drying and clean filament after
  3. Die swell compensation and calibration plate adjustment for TPU
  4. Purge procedure when switching from ABS to PLA to avoid black specks in light colours
  5. Diameter measurement and tolerance logs per spool
Results Achieved
MetricRequirementResult
Materials on one linePLA, ABS, PETG, TPUAll four running commercially
Output on PLA20 kg/h20–22 kg/h
Output on TPUUsable commercial rate12–15 kg/h, stable
Diameter tolerance1.75 mm ±0.03 mm±0.02–0.03 mm on all four polymers
Material changeoverSame shiftUnder 60 minutes including purge
Batch consistencyReduce customer complaintsNo diameter-related rejections in first six months

Within six months the client had moved roughly 70 % of their filament volume in house, run two short colour campaigns without an outside extruder, and added a TPU line they had never been able to source reliably.

Why This Client Chose Friend Plastic Machine
  • Four polymers on one extruder — no second machine for TPU
  • CE certified build with documentation accepted at Malaysian customs
  • Trial run before shipment on the customer's own resins, video approved remotely
  • 30 working day lead time and PE film plus wood case packing for sea freight
  • On-site commissioning in English, plus spare dies and calibration plates held in stock
Conclusion

A multi-material filament line only works if the screw, cooling length, haul-off and drying stage are sized for the most difficult polymer in the recipe — in this case TPU — not for PLA alone. If you are evaluating a PLA, ABS, PETG or TPU 3D printer filament extruder machine for your own market, send us your material list, target diameter and available floor length, and our engineers will propose a configuration and a material trial plan built around your resins.

Aktueller Firmenfall über
Details der Lösungen
Created with Pixso. Heim Created with Pixso. Lösungen Created with Pixso.

PLA ABS PETG TPU 3D Printer Filament Extruder Machine Delivered to Malaysian Filament Producer

PLA ABS PETG TPU 3D Printer Filament Extruder Machine Delivered to Malaysian Filament Producer

2026-11-18
Project Overview

A filament producer in Malaysia ordered a PLA ABS PETG TPU 3D printer filament extruder machine from Friend Plastic Machine — the CE certified FLD-45 single screw line — to replace toll-produced filament with in-house production. The brief was unusual in one respect: the client wanted one machine, four polymers. PLA, ABS, PETG and TPU all had to run on the same 45 mm extruder with no screw change, only a die and temperature recipe change. The line was built, trial-run on the customer's own resins in our Zhangjiagang workshop, shipped in 30 working days, and has been running three polymer families commercially since commissioning, with TPU added in the third month.

Customer Background

The buyer supplies 1.75 mm filament to Malaysian 3D printing service bureaus, school STEM programmes and a growing base of industrial users in Johor and Selangor. Sourcing finished filament from third-party extruders gave them 4–6 week lead times, no control over batch-to-batch diameter, and no short colour campaigns for local resellers. Their target was an in-house line that could switch between commodity materials in a single shift.

Malaysia's year-round humidity is unforgiving to hygroscopic polymers, so moisture control rather than line speed became the decisive issue.

Materials and Process Requirements
MaterialBarrel TemperaturePre-dryingPractical Output
PLA190–210 °C45 °C / 4 h20–22 kg/h
ABS230–250 °C75 °C / 4 h19–21 kg/h
PETG235–250 °C65 °C / 5 h18–20 kg/h
TPU (95A)195–215 °C80 °C / 4 h12–15 kg/h

All four materials had to hold 1.75 mm ±0.03 mm, because the client's service-bureau customers print on both Bowden and direct-drive machines where diameter drift shows up immediately as under-extrusion or jams. TPU set the hardest constraint: soft pellets feed unevenly, generate more die swell, and need gentler screw compression and tighter haul-off control than rigid polymers.

Machine Configuration Supplied
  • FLD-45 / SJ-45 single screw extruder, 45 mm screw, 15 kW drive, general-purpose screw geometry suitable for both rigid and soft polymers
  • 1.75 mm strand die and calibration plate set, plus a 3.0 mm set for industrial users
  • Two 3 m water cooling baths with calibration — extended cooling is what keeps TPU round rather than oval
  • Caterpillar haul-off unit with fine speed control for soft filament
  • Variable speed wind-up station for 1–5 kg spools
  • Hopper dryer with dehumidified air, sized for the Malaysian climate
  • CE certified electrical cabinet, guarded rotating parts, emergency stop circuit
Commissioning and Material Trials

A Friend commissioning engineer spent eight days on site in Malaysia. The first three days were mechanical: levelling the 17 m line, setting die and calibration gaps, and establishing stable haul-off tension. The remaining days were dedicated to material trials, working through the four polymers in sequence so the client's operators could see how the same line responds differently to each one:

  1. Temperature profile and screw speed settings for PLA, ABS, PETG and TPU
  2. Drying routine for each polymer, including a check that showed visibly bubbling PETG before drying and clean filament after
  3. Die swell compensation and calibration plate adjustment for TPU
  4. Purge procedure when switching from ABS to PLA to avoid black specks in light colours
  5. Diameter measurement and tolerance logs per spool
Results Achieved
MetricRequirementResult
Materials on one linePLA, ABS, PETG, TPUAll four running commercially
Output on PLA20 kg/h20–22 kg/h
Output on TPUUsable commercial rate12–15 kg/h, stable
Diameter tolerance1.75 mm ±0.03 mm±0.02–0.03 mm on all four polymers
Material changeoverSame shiftUnder 60 minutes including purge
Batch consistencyReduce customer complaintsNo diameter-related rejections in first six months

Within six months the client had moved roughly 70 % of their filament volume in house, run two short colour campaigns without an outside extruder, and added a TPU line they had never been able to source reliably.

Why This Client Chose Friend Plastic Machine
  • Four polymers on one extruder — no second machine for TPU
  • CE certified build with documentation accepted at Malaysian customs
  • Trial run before shipment on the customer's own resins, video approved remotely
  • 30 working day lead time and PE film plus wood case packing for sea freight
  • On-site commissioning in English, plus spare dies and calibration plates held in stock
Conclusion

A multi-material filament line only works if the screw, cooling length, haul-off and drying stage are sized for the most difficult polymer in the recipe — in this case TPU — not for PLA alone. If you are evaluating a PLA, ABS, PETG or TPU 3D printer filament extruder machine for your own market, send us your material list, target diameter and available floor length, and our engineers will propose a configuration and a material trial plan built around your resins.